Hitachi CPD10WALLARM Operating Guide - Page 31
INPUT menu
View all Hitachi CPD10WALLARM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table. INPUT menu Item Description Using the ▲/▼ cursor buttons switches the progress mode. TV FILM OFF PROGRESSIVE • This function is performed only for a video signal, s-video signal or component video signal of 480i@60 or 576i@50. • When the TV or the FILM is selected, the screen image will be sharp. The FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select the OFF, even though the screen image may lose sharpness. Using the ▲/▼ cursor buttons switches the noise reduction mode. HIGH MID LOW VIDEO NR • This function is performed only for a video signal, s-video signal or component video signal of 480i@60 or 576i@50. • When this function is excessive, it may cause a certain degradation of the picture. Using the ▲/▼ cursor buttons switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 COLOR SPACE • This item can be selected only for a computer signal or a component video signal. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except the AUTO. (continued on next page) 31