Home » Hitachi Manuals » Projectors » Hitachi CPX265 » Manual Viewer

Hitachi CPX265 User Manual

Hitachi CPX265 - XGA LCD Projector Manual

UPC - 050585151000

View all Hitachi CPX265 manuals

Add to My Manuals
Save this manual to your list of manuals

Hitachi CPX265 manual content summary:

Hitachi CPX265 | User Manual - Page 1
Projector CP-X256/CP-X265 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for
Hitachi CPX265 | User Manual - Page 2
, Reset, Filter time, About contents of package 3 Language, Go to advanced menu Fastening the lens cover 3 PICTURE Menu 27 Part names 4 Brightness, Contrast, Gamma,Color temp, Projector 4 Color, Tint, Sharpness, My memory Control buttons 6 IMAGE Menu 30 Remote control 6 Setting up
Hitachi CPX265 | User Manual - Page 3
and usability to use it where you want. Preparations About contents of package Please see the "Contents of package" of the "User's Manual - Quick Guide". Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Keep the original packing
Hitachi CPX265 | User Manual - Page 4
Part names Part names Projector ê Control buttons (6) Lamp cover (54) (Lamp unit is inside.) Zoom ring (19) Focus ring (19) Vent Lens (17) Lens cover (3) Remote sensor (16) Speaker Security bar (10) (Use for attaching a commercial anti-theft chain or wire.) Front-Right side Elevator
Hitachi CPX265 | User Manual - Page 5
to change the settings. 36) Kensington lock slot NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please
Hitachi CPX265 | User Manual - Page 6
Part names Control buttons Cursor buttons 24) STANDBY/ON button (17) LAMP indicator (60, 61) TEMP indicator (60, 61) POWER indicator (17, 60, 61) INPUT button (18) Remote control SEARCH button (19) RGB button (18) VIDEO button (19) ASPECT button (19) HOME button (23) MAGNIFY ON button
Hitachi CPX265 | User Manual - Page 7
electric shock and/or malfunction to the projector. • Do not place the projector near a humidifier, a smoking space or a kitchen. ►Adjust the position of the projector to prevent any strong light, like direct sunlight or inverter fluorescent lamp light, from hitting the projector's remote sensor.
Hitachi CPX265 | User Manual - Page 8
The values shown in the table are calculated for a full size screen: 1024×768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (b) (c) The height of the screen (±10%) 4:3 (a) 16:9 (a) (c) up (c) down (a) Screen size [inch (m)] 30 (0.8) 40 (1.0) 50 (1.3) 60
Hitachi CPX265 | User Manual - Page 9
. ►Except for inclining by the elevator feet adjustment, place the projector horizontally. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection
Hitachi CPX265 | User Manual - Page 10
measure. A commercial anti-theft chain or wire can be attached to the security bar on the projector. 1. How to attach An anti-theft chain or wire can be attached as shown in the AUDIO IN2 LAN RGB IN2 AUDIO OUT RGB OUT CONTROL USB Security Bar Anti-theft chain or wire [sold separately] 10
Hitachi CPX265 | User Manual - Page 11
to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure
Hitachi CPX265 | User Manual - Page 12
AUDIO IN2 port is the audio port for the RGB IN2 ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36) audio cable AUDIO IN3 Y R CB/PB L CR/PR VIDEO S-VIDEO RGB IN1 AUDIO IN1 AUDIO IN2 K RGRGBB INI2N2 CONTROL LAN RGB OUT AUDIO OUT USB Connecting to a monitor (
Hitachi CPX265 | User Manual - Page 13
and COMPONENT VIDEO ports. To change the settings, refer to the AUDIO item in the SETUP menu. (36) Audio/Video cable Audio (R) out Audio (L) out Video out AUDIO IN3 Y R CB/PB L CR/PR VIDEO S-VIDEO RGB IN1 AUDIO IN1 AUDIO IN2 K LAN RGB IN2 RGB OUT AUDIO OUT CONTROL USB Audio cable
Hitachi CPX265 | User Manual - Page 14
or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. connection of the three-pronged plug. CB/PB CR/PR VIDEO S-VIDEO AUDIOAUIND2RIOGIBN1IN1 RGB IN2 CONTROL LAN RGB OUT USB AUDIO OUT AC inlet AC IN Connector
Hitachi CPX265 | User Manual - Page 15
direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control. 3. Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. 15
Hitachi CPX265 | User Manual - Page 16
remote control, user-specified settings are saved for about half a day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to Setting 1. Changing the signal setting for the projector's remote sensor Switch between Setting 1 and 2 using the SERVICE
Hitachi CPX265 | User Manual - Page 17
10 minute in this case. Neglect could shorten the lifetime of the lamp. (2) During use or immediately after use, do not touch around the lamp and vents of the projector (4 ê) It could cause a burn. 1. Press the STANDBY/ON button on the projector or the remote control. Power off? The message
Hitachi CPX265 | User Manual - Page 18
AC IN 1. Press the RGB button on the remote control to select an input port for the RGB signal. Each time you press the button, the projector switches its RGB VIDEO RGB SEARCH input port as below. ASPECT AUTO BLANK RGB IN1  RGB IN2 MAGNIFY ON HOME PAGE UP VOLUME ● If the RGB button
Hitachi CPX265 | User Manual - Page 19
(continued) 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. COMPONENT VIDEO  S-VIDEO  VIDEO VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END
Hitachi CPX265 | User Manual - Page 20
feature 1. Press the AUTO button on the remote control.  For an RGB signal The vertical position, the horizontal position, the horizontal VIDEO RGB SEARCH ASPECT AUTO BLANK phase and the horizontal size will be automatically adjusted. MAGNIFY ON HOME PAGE UP VOLUME And the aspect ratio
Hitachi CPX265 | User Manual - Page 21
the ON button of MAGNIFY on the remote control. The "MAGNIFY" indication will appear on the screen VIDEO RGB SEARCH ASPECT AUTO BLANK (although the indication will disappear in several seconds with MAGNIFY HOME PAGEUP VOLUME ON no operation), and the projector will enter the MAGNIFY mode. OFF
Hitachi CPX265 | User Manual - Page 22
the FREEZE button again. POSITION MENU ● The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector's buttons or the remote control bENTuERttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECESCT, VOLURMESETE, MUTE, KEYSTONE, POSITION
Hitachi CPX265 | User Manual - Page 23
and keyboard control 1. Connect the projector's USB port to the computer via the mouse cable. VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP HOME key Press keyboard's END key Press keyboard's PAGE UP key Press keyboard's PAGE DOWN key Press keyboard's ESC key Remote control
Hitachi CPX265 | User Manual - Page 24
ESC ENTER RESET VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET 1. Press the MENU button on the remote control or one of the cursor buttons on the projector. The Advanced MENU
Hitachi CPX265 | User Manual - Page 25
EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY Menu '#5;/'07=4)$? #52'%6 #-7'6;156-1'0;'5610' ':'%76' 2+%674'/1&' $4+)*60'55 %1064
Hitachi CPX265 | User Manual - Page 26
Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned resetting. Performing this item resets the filter timer which counts usage time of the air filter. A dialog is displayed for confirmation
Hitachi CPX265 | User Manual - Page 27
6'/2 /+&&.' projector or remote control, and press the cursor button ► 5%4''0 126+10 %1.14 6+06 on the projector or remote control, or by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below. No pattern ð Gray scale of 9 steps Ramp  Gray scale
Hitachi CPX265 | User Manual - Page 28
CUSTOM mode. ENTER : OFFSET RG B GAIN RG B OFFSET adjustments change the color intensity on the whole tones of the test pattern. GAIN Strong ó Weak • This item can be selected only for a video signal, s-video or component video signal. Using the buttons ▲/▼ adjusts the tint. Greenish ó Redish
Hitachi CPX265 | User Manual - Page 29
and then pressing the button ► or the ENTER button performs each function. LOAD1 ó LOAD2 ó LOAD3 ó LOAD4 SAVE4 óSAVE3 ó SAVE2 ó SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds to the
Hitachi CPX265 | User Manual - Page 30
on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute video and component signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case,
Hitachi CPX265 | User Manual - Page 31
displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. Selecting this item . Use a bright picture when adjusting. For a video signal or s-video signal The video format best suited for the respective input signal will
Hitachi CPX265 | User Manual - Page 32
14/#6#761 (4#/'.1%-674010 on the projector or remote control, or the ENTER button 0'6914- 4)$+0 '#5;/'07 4'51.76+10 on the remote control to execute the item. Then perform it referring to the following table. Item PROGRESSIVE VIDEO NR Description Using the buttons ▲/▼ switches
Hitachi CPX265 | User Manual - Page 33
a SCART RGB input to the projector. For details, contact your dealer. Set the video format for the s-video port and video port. (1) Use the ◄/► . • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Set the RGB input signal type for the RGB
Hitachi CPX265 | User Manual - Page 34
resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press 7561/ Z (6) To revert back to the previous resolution without saving changes place the cursor on the left-most digit and press the ◄ button
Hitachi CPX265 | User Manual - Page 35
on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute once when selected in the Menu. When the slant of the projector is changed, executes this function again. • When V:INVERT or H&V:INVERT is selected
Hitachi CPX265 | User Manual - Page 36
Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned 4)$ 4)$ %1/210'06 58+&'1 8+&'1 (1) RGB1 ó RGB2 ó COMPONENT ó S-VIDEO ó VIDEO (2) 1 ó 2 ó 3 ó 36
Hitachi CPX265 | User Manual - Page 37
on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. • For the MyScreen, please refer
Hitachi CPX265 | User Manual - Page 38
afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the the target picture to be displayed, and press the ENTER button on the remote control when the picture is displayed. The picture will freeze and the frame for
Hitachi CPX265 | User Manual - Page 39
Mode displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. • When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22). Each input port for this projector can have a name
Hitachi CPX265 | User Manual - Page 40
an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table
Hitachi CPX265 | User Manual - Page 41
about the lamp. • For the lamp replacement, see the section "Lamp" (53, 54). The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter. Pressing the RESET button on the remote control or the button ► of the projector displays
Hitachi CPX265 | User Manual - Page 42
control to execute the item. FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK SERVICE 42 FACTORY RESET  INFORMATION  REMOTE FREQ. FAN SPEED Using the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector
Hitachi CPX265 | User Manual - Page 43
Menu (continued) Item SERVICE Description REMOTE FREQ. Use the ▲/▼ button to change the Projector's remote sensor setting (16). 1:NORMAL ó 2:HIGH Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If the remote control does not function correctly
Hitachi CPX265 | User Manual - Page 44
Description This projector is equipped with security functions. User registration is is 3046. This PASSWORD can be changed (1.2 Changing the PASSWORD). 5'%74+6; '06'42#55914& . Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX
Hitachi CPX265 | User Manual - Page 45
remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code will be displayed. NOTE: If there is no key your user registration
Hitachi CPX265 | User Manual - Page 46
':+6 PASSWORD BOX Pressing the ENTER button on the remote control or INPUT button on the projector will close the PASSWORD box. When a PASSWORD after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being
Hitachi CPX265 | User Manual - Page 47
part PIN Code using the /RGB and INPUT buttons. 2+0$1: A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code +PRWV2+0%QFG 4)$ registration. NOTE: If there is no key key input for about 5 minutes while the Inquiring Code is displayed the projector
Hitachi CPX265 | User Manual - Page 48
displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch remote controll or the 37+6 0':6 CHECK PASSWORD BOX 6TCPUKVKQP&GVGEVQT %1/2.'6' '06'4 ':+6 PASSWORD BOX INPUT button on the projector
Hitachi CPX265 | User Manual - Page 49
Code will be displayed inside the BOX. 4.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 6TCPUKVKQP&GVGEVQT '06'42#55914& +PSWKTKPI%QFG 37+6 0':6 ENTER PASSWORD BOX (large) 49
Hitachi CPX265 | User Manual - Page 50
] if your network has DHCP enabled. ( User's Manual - Network Functions) • If you are not utilizing SNTP ( User's Manual - Network Functions), then you must set the your network. Incorrect network settings on this projector may cause unnecessary troubles on the network. Item DHCP (Dynamic Host
Hitachi CPX265 | User Manual - Page 51
or the INPUT button on the projector. If you do not wish to delete the image use the ESC button on the remote control or push the ◄ and INPUT buttons on the projector at the same time. ~Note~ • Items with no image stored cannot be selected. • Images can be changed using the ▲/▼ buttons while the
Hitachi CPX265 | User Manual - Page 52
projector name are displayed. • When the voltage level of battery for built in clock decreases, set time may become incorrect even though accurate date and time are input. Replace a battery through the following the instructions changed. After selecting RESTART, Network menu may not be controlled
Hitachi CPX265 | User Manual - Page 53
. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. To replace the lamp, make sure that the screws are tightened firmly. Loose screws could result in damage or
Hitachi CPX265 | User Manual - Page 54
DT00757, < CP-X265 > DT00751 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In the case of replacement by
Hitachi CPX265 | User Manual - Page 55
. Type number = NJ22222 And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. Handle
Hitachi CPX265 | User Manual - Page 56
on the air filter. Reattach the filter cover to the projector by aligning the filter cover with the grooves on the projector. While holding the handle, push down on the filter cover until it locks firmly in place. Air filter's knob Air filter Filter cover mark 6. Turn the projector on and reset
Hitachi CPX265 | User Manual - Page 57
projector over once more, so that the bottom faces up, and reload the battery correctly. NOTE • The internal clock's time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery. (Please refer to 51 and User's Manual-Network
Hitachi CPX265 | User Manual - Page 58
not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the
Hitachi CPX265 | User Manual - Page 59
the SERVICE item in the OPTION menu to HIGH. REMINDER A note of precaution when cleaning the air filter. *** HRS PASSED AFTER THE Please immediately turn the power off, and clean or change LAST FILTER CHECK. the air filter referring to the "Air Filter" section of this manual FILTER MAINTENANCE
Hitachi CPX265 | User Manual - Page 60
the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is
Hitachi CPX265 | User Manual - Page 61
Please refer to the User's Manual-Network Functions: Schedule Settings for more information.) NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the "" (OFF
Hitachi CPX265 | User Manual - Page 62
problem. CB/PB CR/PR VIDEO S-VIDEO AUDIOAUIND2RIOGIBN1IN1 RGB IN2 LAN If the situation cannot be corrected, CONTROL RGB OUT USB AUDIO OUT 2. The projector Then, if the problem is not removed after the remedy, please contact your dealer or service company. Phenomenon Cases not involving a
Hitachi CPX265 | User Manual - Page 63
. 25 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play 11 monitor using another plug and play monitor. The BLANK screen is displayed. Press the BLANK button on the remote control. 22 Video screen The FREEZE function is
Hitachi CPX265 | User Manual - Page 64
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect item in the SETUP menu. 26, 35 The lamp is approaching the end of its product lifetime. Replace the lamp. 53, 54 Pictures appear blurry. Either the focus
Hitachi CPX265 | User Manual - Page 65
: AUDIO OUT .....Stereo mini x1 Video input: COMPONENT VIDEO (Y, CB/PB, CR/PR)...... RCA x3 S-Video Mini DIN x1 Video RCA x1 Communication port: CONTROL D-sub 9pin x1 USB USB(B) x1 LAN RJ-45 x1 Lamp Optional parts Air filter CP-X256 : DT00757 CP-X265 : DT00751 NJ22222 Others • Please
Hitachi CPX265 | User Manual - Page 66
249 mm 120 mm Y AUDIO IN3 R CB/PB L CR/PR VIDEO S-VIDEO RGB IN1 AUDIO IN1 AUDIO IN2 Specifications Specifications (continued) 306 mm 66 LAN RGB IN2 RGB OUT AUDIO OUT CONTROL USB 106 mm AC IN