Hitachi CPX265 User Manual - Page 50

NETWORK Menu NETWORK Menu Select [Network] from the main menu to access the following functions. /'07=4)$? 5'.'%6 2+%674' &*%2 67401(( +/#)' +2#&&4'55 +0276 57$0'6/#5- 5'672 &'(#7.6)#6'9#; 5%4''0 6+/'&+(('4'0%' 126+10 '#0&6+/' 0'6914- G5*16 '#5;/'07 +0(14/#6+10 5'48+%' NOTE • The factory default setting for DHCP is "TURN ON". You do not have to set up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network has DHCP enabled. ( User's Manual - Network Functions) • If you are not utilizing SNTP ( User's Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list. NOTE Ask with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause unnecessary troubles on the network. Item DHCP (Dynamic Host Configuration Protocol) IP ADDRESS SUBNET MASK Operation DHCP TURN ON/TURN OFF: Use the ▲/▼ buttons to turn DHCP on/off TURN ON  TURN OFF DHCP TURN ON TURN OFF Select TURN OFF when the network does not have DHCP enabled. Input the IP ADDRESS : Use the buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to "TURN OFF". 192. 168. 1. 254 IP ADDRESS ~Note~ IP ADDRESS is a number which identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network. Input the SUBNET MASK : Use the buttons to enter the same SUBNET MASK of your PC. This function is available as long as DHCP is set to "TURN OFF". 255. 255. 255. 0 SUBNET MASK 50