Hitachi CPX265 User Manual - Page 48

OPTION Menu OPTION Menu (continued) Item SECURITY Description 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • Transition Detector alarm might appear on screen, if the MIRROR setting has been changed. • Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON. 4.1 Turning On the Transition Detector Function 4.1-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle and mirror setting will be recorded. NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected. 6TCPUKVKQP&GVGEVQT 674010 67401(( Transition Detector on/off menu 4.1-2 If this function is set to TURN ON when the 64#05+6+10&'6'%61410 vertical angle of the projector or mirror setting at which the projector is turned on is different than the previously recorded the Transition 6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP 2+0$1: +H[QWYKUJVQJCXGCUSWCTGKOCIG QPUETGGPCICKP FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW Detector Alarm will be displayed and the projector will not display the input signal. Transition Detector Alarm Set the Transition Detector off in the SECURITY menu or set the projector at the recorded angle to display the input signal. If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition Detector and press the ► or the ENTER button to display the Transition Detector on/off menu. 4.2-2 Use the ▲/▼ buttons on the Transition Detector 6TCPUKVKQP&GVGEVQT '06'42#55914& on/off menu to select TURN ON. The ENTER PASSWORD BOX (small) will be displayed.  37+6 0':6 4.2-3 Use the buttons to enter a PASSWORD. ENTER PASSWORD Move the cursor to the right side of the ENTER BOX (small) PASSWORD BOX (small) and press the ► button to display the CHECK PASSWORD BOX, enter the 6TCPUKVKQP&GVGEVQT %*'%-2#55914& same PASSWORD again.  4.2-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. After the PASSWORD has displayed for about 20 seconds the screen will return to the Transition Detector on/off menu. Pressing the ENTER button on the remote controll or the 37+6 0':6 CHECK PASSWORD BOX 6TCPUKVKQP&GVGEVQT %1/2.'6'  '06'4 ':+6 PASSWORD BOX INPUT button on the projector will close the PASSWORD BOX. NOTE : P lease do not forget your Transition Detector PASSWORD. 48