Hitachi CPX265 User Manual - Page 27

PICTURE Menu PICTURE Menu With the PICTURE menu, the items shown in the table /'07=4)$? 5'.'%6  below can be performed. 2+%674' +/#)' $4+)*60'55㧗 %1064#56㧗 Select an item using the cursor buttons ▲/▼ on the +0276 5'672 )#//# &'(#7.6 %1.146'/2 /+&&.' projector or remote control, and press the cursor button ► 5%4''0 126+10 %1.14 6+06 on the projector or remote control, or the ENTER button 0'6914- 5*#420'55 5;/'07 /;/'/14;5#8' on the remote control to execute the item. Then perform it referring to the following table. Item BRIGHTNESS CONTRAST Description Using the buttons ▲/▼ adjusts the brightness. : Light ó Dark Using the buttons ▲/▼ adjusts the contrast. : Strong ó Weak Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT ó#1 CUSTOM ó #2 DEFAULT ó #2 CUSTOM ó #3 DEFAULT GAMMA #5 CUSTOM ó #5 DEFAULT ó #4 CUSTOM ó #4 DEFAULT ó #3 CUSTOM To adjust CUSTOM Selecting a mode of CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the mode. This function is useful when you want to change the brightness of particular tones. ENTER : 1 23 4 56 7 8 Choose an item using the buttons ◄/►, and adjust the level using the buttons ▲/▼. +0 +0 +0 +0 +0 +0 +0 +0 GAMMA [CUSTOM 1] You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below. No pattern ð Gray scale of 9 steps Ramp  Gray scale of 15 steps The eight equalizing bars correspond to eight tone levels of the test pattern except the darkest in the left end. If you want to adjust the 2nd tone from left end on the test pattern (Gray scale of 9 steps), use the equalizing adjustment bar "1". The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar. • When this function is performed, a certain extra such as a line may appear. 27