Hitachi CPX265 Network Functions - Page 31

Controlling the Projector via Scheduling Schedule Settings (16) Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser. 2) Enter the Administrator ID and Password and click [Logon]. 3) C lick [Schedule Settings] on the main menu and select the required schedule item. 4) Click the [Enable] check box to enable scheduling. 5) Enter the Date (Month/Day) for specific date scheduling. 6) Click [Add] and set the hour, command and parameters and click [Add This Schedule] when you want to add a command. 7) Click the [Delete] button when you want to delete a schedule. 8) Click the [Apply] button to save the settings. There are three types of scheduling. 1) Daily: Perform the specified operation at a specified time every day. 2) Sunday ~ Saturday: Perform the specified operation at the specified time on a specified day of the week. 3) Specific Date: Perform the specified operation on the specified date and time. NOTE • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 "Power ON" schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [¡] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power. 31