Hitachi CPX265 Network Functions - Page 32
e-Shot Still Image Transfer Display
UPC - 050585151000
View all Hitachi CPX265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
e-Shot (Still Image Transfer) Display e-Shot (Still Image Transfer) Display The projector can display a still image that is transferred via the network. Communication Port The following port is used for e-Shot. TCP #9716 (9) NOTE • e-Shot is not available via communication ports which are used for the command control (TCP #23 and TCP #9715). e-Shot (Still Image Transfer) Settings Configure the following items from a web browser when e-Shot is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser. 2) E nter the Administrator ID and Password and click [Logon]. 3) Click [Port settings] on the main menu. 4) Click the [Enable] check box to open the [Image Transfer Port (Port: 9716)]. Click the [Enable] check box for the [Authentication] setting when authentication is required, otherwise clear the check box. 5) Click the [Apply] button to save the settings. 32