Hitachi DV-P533U Owners Guide - Page 12

PLAYING A DISC Track Selection Subtitle Language MP3 1 Press SEARCH MODE during playback. • The FILE LIST will appear. 2 Select a desired track using Arrow (L/K/B/s). • Press B when you want to go to the next hierarchy. • Press s when you want to go back to the previous hierarchy. 3 Press PLAY to start playing NOTES: • Press SEARCH MODE to EXIT. • Some selections may require additional time to be recog- nized. Random Playback MP3 1 Press MODE twice while playback is stopped. 2 Press PLAY to play the tracks in random order. DVD The DVD player allows you to select a language for subtitle during DVD disc (if available) playback. 1 Press SUBTITLE during playback. 2 Press SUBTITLE repeatedly to select your desired subtitle language. • The selected language will be displayed on the display bar at the top of the screen. 3 To turn off subtitles, press SUBTITLE repeatedly until OFF appears. NOTES: • Pressing AUDIO may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). • Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.) • If the desired language is not shown after pressing SUBTITLE several times, the disc does not have subtitles in that language. • If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, '---' will be displayed instead. (Refer to page 14.) Program Camera Angle MP3 This feature allows you to program a mp3 disc to play in a desired sequence. 1 Press MODE while playback is stopped. • The PROGRAM screen will appear. 2 Press K or L to select a track, then press ENTER, to save it in a program. • Press CLEAR to erase the incorrect input. 3 Press PLAY to start programmed playback. DVD Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) mark appears on the screen. 1 Press ANGLE during playback. • The selected angle will be displayed on the display bar at the top of the screen. 2 Press ANGLE repeatedly to select your desired angle. Changing the On-Screen Display Audio Language DVD DVD The DVD player allows you to select a language during DVD disc (if multi language available) playback. 1 Press AUDIO during playback. 2 Press AUDIO repeatedly to select your desired language. Stereo Sound Mode CD 1 Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH. STEREO - both right and left channels are active (stereo) L-CH - only left channel is active R-CH - only right channel is active You can check information about the current disc by pressing DISPLAY on the remote control. 1 Press DISPLAY during playback to show current Chapter. 9/49 0:00:00 -0:00:00 • The elapsed and remaining playing time of the current chapter will be displayed. 2 Press DISPLAY again to show current Title. • The elapsed and remaining playing time of the current title will be displayed. 3 Press DISPLAY the third time. • The BIT RATE and the current repeat setting will be displayed. • If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing). 4 Press DISPLAY the fourth time to remove the display. CD NOTE: • If the Virtual Surround setting is ON, the sound mode will be fixed to STEREO, and can not be changed. 1 Press DISPLAY during playback, the current Track will be displayed on the TV screen. • The elapsed and remaining playing time of the current track will be displayed. 2 Press DISPLAY again to show current Total Track. • The elapsed and remaining playing time of the current total track will be displayed. 3 Press DISPLAY the third time to remove the display. - 12 - EN