Hitachi DV-P533U Owners Guide - Page 15

TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting the following checklist. Problem Solution No power No sound or picture Distorted picture Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output No DTS audio output Picture freezes momentarily during playback Disc can't be played No return to start-up screen when disc is removed The player does not respond to the remote control Buttons do not work or player stops responding Player does not respond to some operating commands during playback. DVD player cannot read CDs/DVDs -Check if the AC power cord is properly connected. -Unplug the outlet once, and wait for 5-10seconds and then plug it in again -Check if the TV is switched on. -Check the video connection -Check the VIDEO/AUDIO cable connections to the TV (See Connecting to a TV) -Check if the INTERLACE/PROGRESSIVE SCAN SELECTOR is set correctly according to your TV. -Sometimes a small amount of picture distortion may appear. This is not a malfunction. -Connect the player directly to th TV. -Connect DVD player directly to the TV. -Make sure the disc is compatible with the DVD player. -Adjust the volume. -Check that the speakers are connected correctly. -Check the digital connections. -Check if the audio format of the selected audio language matches your receiver capabilities. -This player does not support DTS audio. This is not a malfunction. -Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. -Clean the disc -Clean the disc -Ensure the disc label is facing up. -Check if the disc is defective by trying another disc. -Cancel the parental lock or change the control level. -Insert a correct disc that palys on this player. -Reset the player by switching the player off, then on again. -Aim the remote control directly at the sensor on the front of the player. -Reduce the distance to the player. -Replace the batteries in the remote control. -Re-insert the batteries with their polarities (+/- signs) as indicated. -To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. -Operations may not be permitted by the disc. Refer to the instructions of the disc. -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD player for repair. NOTES: Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback. SPECIFICATIONS OUTPUT SIGNAL FORMAT NTSC color POWER SOURCE 120 V AC +/- 10%, 60 Hz +/- 0.5% POWER CONSUMPTION 11 W (standby: 3.9W) OPERATING TEMPERATURE 41°F(5°C) to 104°F(40°C) DIMENSIONS W 17-1/8" (435mm) H 2-1/4" (55mm) D 8-1/4" (211mm) WEIGHT Approx 3.8lbs (1.8kg) • Designs and specifications are subject to change without notice. • If there is a discrepancy between languages, the default language will be English. - 15 - EN