Hitachi DZMV750MA Owners Guide - Page 174

Message Cause & Troubleshooting Disc error. • Use another disc. • See *3 on page 177. • Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/ recorder. Initialize the disc or use another disc. • Initializing the disc will erase all data on it. Disc full. Cannot execute. Delete unnecessary scenes before using this disc, or use another disc. Disc has no data. This message will appear when an attempt is made to execute playback or editing on Disc Navigation with no scene recorded. Disc has no Play List. Switching of play list was selected with no play list stored. Disc includes protected The disc may be software protected from a device other than this scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device that has executed software-protect. Disc is full. Cannot add control info. The number of entered scenes has reached the limit that can be entered, so the control information for generating thumbnails cannot be added. Combine several scenes or delete them. Disc is not formatted. Format the disc now? • Has the disc been initialized on a PC? Choose "YES" and initialize the disc when using it on this DVD video camera/recorder. Initialization will delete all data on the disc. • See *2 on page 177. Drive overheat. Please retry later. The temperature inside the DVD video camera/recorder is too high, and reading or writing of the data on disc may not be performed normally. Turn the DVD video camera/recorder off and wait for a while. The temperature will be effectively decreased if the DVD video camera/recorder is placed in a well-ventilated spot. DVD-R* Disc, 16:9 mode cannot be changed when Video mode is STD. With DVD-RW (VF-mode)/DVD-R disc, the setting of 16:9 mode will not be possible when the Video mode is STD. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). DVD-R* Disc, Input Source cannot be changed. Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in the 16:9 mode, the input source will not be changeable. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). DVD-R* Disc, Video mode and 16:9 mode cannot be changed. With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode and 16:9 mode once used for recording cannot be changed. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). END OF DISC The disc is full. You cannot record on this disc anymore. Prepare another disc or delete unnecessary movie scenes from this disc. End scene cannot be divided. Division is not possible at the end of scene. Error occurred. Please replace disc or format disc. • Abnormality has occurred with the DVD-RAM disc to be repaired. Initialize the disc before using it, or use the another disc. Initializing the disc will erase all data on it. • See *2 on page 177. Reference page 25, 27 135 113 - 128 - 113, 116 135 45 96 96 29, 96 113 115 135 English 174