Hitachi ED-X3400 User Manual
Hitachi ED-X3400 Manual
 |
View all Hitachi ED-X3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi ED-X3400 manual content summary:
- Hitachi ED-X3400 | User Manual - Page 1
Projector ED-S3350/ED-X3400/ED-X3450 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference - Hitachi ED-X3400 | User Manual - Page 2
the remote control 15 Search, Auto off, Lamp time, Filter time, Power on/off 16 Service Turning on the power 16 Maintenance 38 Turning off the power 16 Lamp 38 Operating 17 Air filter 40 Adjusting the volume 17 Other care 41 Temporarily muting the sound . . . . 17 Troubleshooting 42 - Hitachi ED-X3400 | User Manual - Page 3
UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in Please see the "Contents of package" of the "User's manual - Quick guide". Your projector should come with the items shown there. Contact immediately - Hitachi ED-X3400 | User Manual - Page 4
Projector Zoom knob (18) Focus ring (18) Vent (6) Lens cover (16) (Slide door) Lens (16) Lamp cover (Lamp unit is inside.) (38) Front-Right side Remote sensor (15) Speaker Elevator button (8) Elevator foot (8) Filter cover (40) (Air filter and intake vent are inside.) Control buttons - Hitachi ED-X3400 | User Manual - Page 5
button (16) STANDBY/ON Part names LAMP TEMP POWER MENU Cursor buttons INPUT 22) INPUT button (17) Remote control RGB button (17) VIDEO button UP VOLUME OFF END PAGE DOWN MUTE FREEZE KEYSTONE POSITION MENU ESC ENTER RESET SEARCH button (18) STANDBY/ON button (16) AUTO button (19 - Hitachi ED-X3400 | User Manual - Page 6
fire, an electric shock and/or malfunction to the projector. • Don't place the projector near a humidifier, a smoking space or a kitchen. • Put nothing containing the liquid near the projector. ►Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. 6 - Hitachi ED-X3400 | User Manual - Page 7
. The values shown in the table are calculated for a full size screen: 800 x 600 for ED-S3350 / 1024 x 768 for ED-X3400, ED-X3450 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (b) (c) The height of the screen (±10%) 4:3 (a) 16:9 (a) (c) up (c) down At - Hitachi ED-X3400 | User Manual - Page 8
horizontally. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. Elevator feet - Hitachi ED-X3400 | User Manual - Page 9
intake ventilation. Please change in the following procedure. Filter cover's knob Filter cover's knob To remove To set Filter cover Filter cover for bottom-up use 1. After making sure that the projector is cool adequately, slowly turn the projector so that the lens-side is facing up. Please - Hitachi ED-X3400 | User Manual - Page 10
to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer. • Secure - Hitachi ED-X3400 | User Manual - Page 11
AUDIO OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO RGB IN1 CONTROL RGB IN2 Stereo mini audio cable RGB cable RGB OUT Connecting to a AUDIO OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO RGB IN1 CONTROL RGB cable RGB IN2 RGB OUT Connecting to a speaker with amplifier ( - Hitachi ED-X3400 | User Manual - Page 12
OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO RGB IN1 CONTROL RGB IN2 RGB OUT Video cable Stereo mini audio cable Audio out S- AUDIO OUT VIDEO AUDIO IN2 CR/PR S-VIDEO USB COMPONENT VIDEO RGB IN1 CONTROL RGB IN2 RGB OUT S-Video cable Stereo mini audio cable Component video out - Hitachi ED-X3400 | User Manual - Page 13
and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • the power cord into an outlet rated for use with the power cord's specified voltage range. • Never modify the power cord. Never attempt to defeat the - Hitachi ED-X3400 | User Manual - Page 14
direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control. 3. Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. 14 - Hitachi ED-X3400 | User Manual - Page 15
as from an inverter fluorescent lamp), hit the projector's remote sensor, the remote control may cause to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor. The remote control works with the projector's remote sensor. approx. 3 meters 30 - Hitachi ED-X3400 | User Manual - Page 16
or remote control. The projector lamp will light up and the POWER indicator will begin blinking green. When the power is completely on, the indicator will stop blinking light green. To display the picture, select an input signal according to the section "Selecting an input signal" (17). Turning - Hitachi ED-X3400 | User Manual - Page 17
RESET Selecting an input signal 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port as below. RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO STANDBY/ON LAMP TEMP POWER MENU INPUT 1. Press the RGB button on the remote control - Hitachi ED-X3400 | User Manual - Page 18
BLANK 1. Press the SEARCH button on the remote control. The projector will begin to check its input ports in order to find any input signals. MAGNIFY HOME ON PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE KEYSTONE POSITION MENU ESC ENTER RESET VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO - Hitachi ED-X3400 | User Manual - Page 19
of the INPUT menu (30). For a component video signal,STANDBY/ON VIDEO RGB SEARCH the signal type is identified automatically independently the picture position. ESC RESET ESC RESET When you want to reset the operation, press the RESET button on the remote control during the operation. - Hitachi ED-X3400 | User Manual - Page 20
and restore the screen to normal, press the FREEZE button again. ESC ENTER RESET ● The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector's buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME - Hitachi ED-X3400 | User Manual - Page 21
's HOME key Press keyboard's END key Press keyboard's PAGE UP key Press keyboard's PAGE DOWN key Press keyboard's ESC key Remote control operation Use buttons Press ENTER button Press RESET button Press HOME button Press END button Press PAGE UP button Press PAGE DOWN button Press ESC button 21 - Hitachi ED-X3400 | User Manual - Page 22
STANDBY/ON LAMP TEMP POWER MENU INPUT MENU button POSITION MENU Cursor buttons ENTER ENTER button ESC RESET RESET button VIDEO button ► on the projector or remote control, or the ENTER button on the remote control to progress. WHISPER MIRROR RESET FILTER TIME LANGUAGE NORMAL NORMAL - Hitachi ED-X3400 | User Manual - Page 23
the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 KEYSTONE +0 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHRPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET FILTER TIME 0 LANGUAGE ENGLISH Go - Hitachi ED-X3400 | User Manual - Page 24
is displayed to make sure. Selecting RESET using the button ▲ performs reset. Performing this item resets the filter timer which counts use time of air filter. A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. See the item FILTER TIME of section OPTION menu (37 - Hitachi ED-X3400 | User Manual - Page 25
the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT - Hitachi ED-X3400 | User Manual - Page 26
Multifunctional settings PICTURE Menu (continued) Item Description Using the buttons ▲/▼ switches the mode of color temperature. HIGH MIDDLE LOW CUSTOM COLOR TEMP COLOR TINT SHARPNESS To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a - Hitachi ED-X3400 | User Manual - Page 27
This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input of 525i (480i) or 625i (576i) signal. • LOAD3 LOAD4 MY MEMORY SAVE4 SAVE3 SAVE2 SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, - Hitachi ED-X3400 | User Manual - Page 28
4:3 IMAGE OVER SCAN 95 Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on INPUT V POSITION 25 SETUP H POSITION 142 SCREEN H PHASE 16 OPTION H SIZE 1344 EASY MENU - Hitachi ED-X3400 | User Manual - Page 29
correctly. In such a case, please reset the adjustment pressing the RESET button on the remote control during this operation. Selecting this item performs to the item VIDEO FORMAT of INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. - Hitachi ED-X3400 | User Manual - Page 30
projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT models Ed-X3400 and ED-X3450, or 50 to 72Hz for the model ED-S3350. - Hitachi ED-X3400 | User Manual - Page 31
on the dialog means the frame lock function is working (30). • The "SCART RGB" message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the item COMPONENT in this section. (30) • This item is can't be selected at no signal. 31 - Hitachi ED-X3400 | User Manual - Page 32
using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU - Hitachi ED-X3400 | User Manual - Page 33
the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU :SELECT - Hitachi ED-X3400 | User Manual - Page 34
when the picture is display. The picture will freeze and the frame for capturing appears. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjust the frame position. Please move the frame to the position of the picture which you want to use. To start - Hitachi ED-X3400 | User Manual - Page 35
function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "Searching ...." while searching for an input signal "Detecting...." when an input signal is detected The indication of the input signal by changing The indication of the aspect ration by - Hitachi ED-X3400 | User Manual - Page 36
projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU SEARCH AUTO OFF LAMP TIME FILTER TIME SERVICE :SELECT - Hitachi ED-X3400 | User Manual - Page 37
the button ► or the ENTER button on the remote control to progress. FAN SPEED GHOST FACTORY RESET SERVICE FAN SPEED Using the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected - Hitachi ED-X3400 | User Manual - Page 38
the specified type. • If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to - Hitachi ED-X3400 | User Manual - Page 39
the 2 tabs of the lamp cover to the projector, position the lamp cover on the projector. Then push the center point of two claws to fix the lamp cover. Tabs 8. Slowly turn the projector so that the top is facing up. 9. Turn the projector on, and reset the lamp time using the LAMP TIME function of - Hitachi ED-X3400 | User Manual - Page 40
specified type will come even with the replacement lamp for this projector. 7. Position the cleaned air projector on, and reset the filter time using the FILTER TIME function of OPTION menu (37). NOTE • Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting - Hitachi ED-X3400 | User Manual - Page 41
to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as - Hitachi ED-X3400 | User Manual - Page 42
THE POWER WILL TURN OFF by referring to the section "Lamp". After changing the lamp, AFTER 0 hr. please be sure to reset the lamp timer (36). NO INPUT IS DETECTED ON *** There is no input signal. Please confirm the signal input connection, and the status of the signal source. SYNC IS OUT OF - Hitachi ED-X3400 | User Manual - Page 43
immediately turn the power OFF, and clean or change the air filter by referring to the "Air Filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer (37). NOTE • A lamp has a finite product life. Lamps are characterized by the fact that - Hitachi ED-X3400 | User Manual - Page 44
the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is - Hitachi ED-X3400 | User Manual - Page 45
"Air Filter". After cleaning or changed the air filter, please be sure to reset the filter timer. After the treatment, resent the power to ON. NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also - Hitachi ED-X3400 | User Manual - Page 46
by using a cocktail stick or similar and the projector will restart. 3. Some setting may be wrong. Please use the FACTORY RESET function of SERVICE menu in the OPTION menu (37) to reset all settings to factory default. Then, if the problem is not removed after maintenance, please contact your - Hitachi ED-X3400 | User Manual - Page 47
Troubleshooting the remote control. The computer cannot detect the projector as lamp. 38, 39 Pictures appear blurry. Either the focus and/or horizontal phase settings are not properly. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens is dirty or misty. Clean - Hitachi ED-X3400 | User Manual - Page 48
Liquid crystal projector Liquid Crystal panel Panel size Drive system Pixels 1.8 cm (0.7 type) TFT active matrix ED-S3350: 480,000 pixels (800 horizontal x 600 vertical) ED-X3400/X3450: 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens F=1.7 ~ 1.9 f=21.8 ~ 26.2 mm Lamp 165W UHB - Hitachi ED-X3400 | User Manual - Page 49
Specifications (continued) Specifications 237.4 232.8 80.0 64.2 297.0 84.5 32.2 79.7 65.4 14.3 [unit: mm] 49
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
 |
 |
1
Projector
ED-S3350/ED-X3400/ED-X3450
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that , if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that , if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of the Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of the Microsoft Corporation.
• Internet Explorer is a trademark of the Microsoft Corporation.
All other trademarks are the property of their respective owners.