Hitachi ED-X3400 User Manual - Page 23

Multifunctional settings EASY Menu With the EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 KEYSTONE +0 MODE NORMAL BRIGHT +0 CONTRAST +0 COLOR +0 TINT +0 SHRPNESS +3 WHISPER NORMAL MIRROR NORMAL RESET FILTER TIME 0 LANGUAGE ENGLISH Go To Advance Menu... Item ASPECT KEYSTONE MODE BRIGHT CONTRAST COLOR TINT Description Using the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu (28). Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu (32). Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA and a mode of COLOR TEMP. Choose a suitable mode according to the projected source. NORMAL  CINEMA  DYNAMIC NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT) CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) • When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is "CUSTOM". Please refer to the items GAMMA (25) and COLOR TEMP (26) of PICTURE menu. Using the buttons ◄/► adjusts the brightness. See the item BRIGHT of section PICTURE menu (25). Using the buttons ◄/► adjusts the contrast. See the item CONTRAST of section PICTURE menu (25). Using the buttons ◄/► adjusts the strength of whole color. See the item COLOR of section PICTURE menu (26). Using the buttons ◄/► adjusts the tint. See the item TINT of section PICTURE menu (26). 23