Hitachi P42A202 Owners Guide - Page 41
Set The Power Indicator, Set HDMI-CEC Options, Reset The Software, Switch between Home and Retail
UPC - 050585127012
View all Hitachi P42A202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setup Set The Power Indicator This feature allows you to adjust the brightness intensity of the LED indicating light in the Front of your Hitachi Plasma TV. Select MAX or LOW for maximum brightness or lowest brigthness. Select OFF to turn off the indicating light. Setup Set The Power Indicator Power Light Indicator Brightness ◄ Max ► Move SEL Return Set HDMI-CEC Options Set to ON this feature will enable HDMI-CEC signal bus to allow your Hitachi Plasma TV to discover and communicate automatically with other compatible HDMI-interfaced Audio/Video equipment. CEC signal bus makes possible global controls based on "plug & play" automation to minimize the number of IR remotes and keypresses required for basic operation of your AV system. Select OFF to disable this option. Setup Set HDMI-CEC Options HDMI CEC On Off Move SEL Return With "HDMI-CEC" feature, you can interface the connected equipment through the HDMI terminal automatically if the connected equipment meets an industry standard "HDMI CEC (Consumer Electronics Control)". Please check if the connected equipment supports HDMI CEC before using this feature. For example, here are two common functions operating when HDMI CEC is set to ON. Auto Input change and Auto Play Condition : While the Plasma TV is in Standby mode. When the connected equipment starts (such as DVD playback and Disc insertion), the Plasma TV is automatically turned On and switches the picture and audio to HDMI input. System Standby Condition : While the Plasma TV is On. When the Plasma TV is switched off or set to Standby mode, the connected equipment is also turned off or in Standby mode. Reset The Software This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC/SD CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card. Setup Reset The Software Software Upgrade Main : Vxxx.xxxx Sub : Vxx.xx Upgrade Now Please Insert MMC/SD card before upgrading. Switch between Home and Retail Mode Home Retail Move SEL Return 1. Insert MMC/SD CARD. 2. Press the CURSOR PAD ▲ or ▼ to highlight UPGRADE NOW. 3. Press the SELECT button to select and start upgrading. 4. Unplug the AC power cord or press the POWER switch when the UPGRADE is complete. NOTE Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure. Switch between Home and Retail Mode This function allows you to return to the Energy Savings Initial Setting screen (see page 13). 1. Use CURSOR PAD ▲,▼ to highlight functions. 2. Use CURSOR PAD ◄, ► to select Home or Retail mode. 3. Press the SELECT button. NOTE RETAIL Mode is intended for showroom or shop use only, if you make any video or audio adjustment changes in this mode they will not be saved when the TV is turned Off . ON-SCREEN DISPLAY 41