HoMedics BPA-201 Downloadable Instruction Book - Page 11

1. Press the User Select Button to choose User 1 or User 2. Pulse 4. The cuff will begin deflating as measurement continues. / OR START STOP 2. With the cuff wrapped around your arm, press the START/ STOP button. Do not inflate the cuff unless it is wrapped around your arm. All digits will light up to check the display functions. The checking procedurePulsewill be compPluelse ted after a/bout 3 seconds. START STOP Pulse Pulse Pulse 3. After all symbols disappear, the display will show "00". The monitor is "Ready to Measure" and will automatically inflate the cuff to start measurement. Pulse Note: This monitor will re-inflate automatically if the system detects that your body requires more pressure for Pulse Pulse measurement. 5. When the measurement is completed, the cuff will deflate entirely. Systolic pressure, diastolic pressure and pulse will be shown simultaneously on the LCD screen. The measurement is then automatically stored into memory. Pulse Note: 1. This monitor automatically turns off approximately 1 minute afterPulse last operation. You may also press the START/STOP button to turn the unit off. 2. To interrupt the measurement, you may press the START/STOP (recommended), "M," User- Select or Date & Time Set ( ) buttons. The cuff will deflate immediately after a buttons is pressed. Pulse Pulse Pulse Pulse 19 20