HoMedics BPA-201 Downloadable Instruction Book - Page 6

Display Explanations

Page 6 highlights

DISPLAY EXPLANATIONS Date/Time PulsIendicator Systolic Pressure Diastolic Pressure Pulse Heart Rate 9 Display Symbols: User 1: Appears when the monitor is operated by User 1. User 2: Appears when the monitor is operated by User 2. Weak Battery Symbol: Appears when batteries should be replaced. Pulse Symbol: Shows the heart rate per minute. Irregular Heartbeat Detector: Refer to page 21 for more information. Memory Average: Displays average of last 3 readings Risk Category Index: See page 21 for more information. If and any of the following letters and numbers appear in the area that systolic pressure should be displayed, an error has occurred with your reading. See Troubleshooting section of this manual for more information. Measurement Error: Measure again. Wrap the cuff correctly and keep arm steady during measurement. Air Circuit Abnormality: Check cuff connection. Measure again. Pressure Exceeding 300 mmHg: Turn the unit off to clear, then measure again. Error Determining Measurement Data: Measure again. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

9
10
User 1:
Appears when the monitor is operated by User 1.
User 2:
Appears when the monitor is operated by User 2.
Weak Battery Symbol:
Appears when batteries should be
replaced.
Pulse Symbol:
Shows the heart rate per minute.
Irregular Heartbeat Detector:
Refer to page 21 for
more information.
Memory Average:
Displays average of last 3 readings
Risk Category Index:
See page 21 for more information.
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time
Indicator
Pulse
Display Symbols:
Heart Rate
Measurement Error:
Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality:
Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg:
Turn the unit off to clear,
then measure again.
Error Determining Measurement Data:
Measure again.
If
and any of the following letters and numbers appear in the
area that systolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.