Homelite UT44174 User Manual - Page 11

MAINTENANCE LUBRICATING THE BLADES See Figure 6. For easier operation and longer blade life, lubricate shear blades before and after each use. If you will be using the shear for an extended period, it is advisable to oil the blades during use.  Stop the motor and allow blades to stop moving.  Slide bottom cover latch to the right and disable motor. to unlock cover  Lay the shear on a flat surface. Apply light weight machine oil along the edge of the top blade. NOTE: Do not oil while the shear is running.  Slide bottom cover latch to the left reconnect motor. to lock cover and CLEANING THE GRASS SHEAR  Stop the motor and allow blades to stop moving.  Slide bottom cover latch to the right and disable motor. to unlock cover  Snap sheath onto blades.  Clean dirt and debris from the body of the shear, using a damp cloth with a mild detergent. NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene.  Slide bottom cover latch to the left connect motor. to lock and re- BATTERIES This product is equipped with a nickel-cadmium rechargeable battery. Length of service from each charging will depend on the type of work you are doing. The battery in this product has been designed to provide maximum trouble-free life. However, like all batteries, it will eventually wear out. To obtain the longest possible battery life, we suggest removing the product from the charger once it is fully charged and ready for use. NOTE: Batteries are not intended to be replaced. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING See Figure 7.  Stop the motor.  Remove the screws securing motor housing cover, then remove cover.  Lift batteries from motor housing enough to expose leads and battery terminals.  Using wire cutters with rubber coated or insulated handles, clip the battery leads and remove the battery for disposal. To preserve natural resources, please recycle or dispose of batteries ­properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. WARNING: Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. STORING THE GRASS SHEAR See Figure 8.  Clean all foreign material from the grass shear. Store indoors in a dry, locked up place-out of the reach of children. Keep away from corrosive agents such as garden chemicals and de-icing salts.  Always place the sheath on the cutting blades before transporting or storing the unit.  Store the product where the temperature is below 80°F.  Store the product in a "discharged" condition.  Remove the blades and store them in a separate location out of the reach of children to avoid unauthorized use of the shear. Page 11 - English