Honeywell 2054 Operation Manual - Page 4
Opening & Closing Your Safe - manual
UPC - 016247205405
View all Honeywell 2054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Opening & Closing Your Safe Opening The First Time The dial is preset to the fourth (last) number in the combination. The safe door should open when you insert the Companion Entry Key (round top), turn to the right and pull the door open. The dial may move in transit, making it necessary to dial the combination before opening the first time We recommend trying the following combination procedure with safe door open first. Your Combination The combination for your safe can be found imprinted on the inside back cover of this manual. It is a preset 4 number sequence that is unique to your safe and cannot be changed. It is recommended that you keep this manual in a secure place, but NEVER STORE THIS MANUAL INSIDE THE SAFE! Opening With Combination Dial 1. Turn dial RIGHT (clockwise) three times to clear settings. 2. Start the dial on 0 (zero) to dial combination, 3. Turn dial RIGHT, passing first combination number FOUR (4) times and stop at number on fifth time around. 4. Turn dial LEFT, passing second combination number TWO (2) times and stop at number on third time around. 5. Turn dial RIGHT, passing third combination number ONE (1) time and stop at number on the second time around. 6. Turn dial LEFT, to the last combination number and STOP. 7. Insert the key in the lock and turn key RIGHT to open. Closing & Locking The Safe 1. When open, the key is turned right (the unlocked position). 2. Close the safe door and turn the key to the left. 3. Remove the key and spin the combination dial twice. Frequent Key-Only Access When circumstances require frequent, quick and convenient access for limited periods during the day, you may choose to keep the commbination positioned on the last number and lock only the keylock. However, the safe is not fully locked until spinning the dial. Important: REDUCED LEVEL OF SECURITY The safe is ONLY FULLY LOCKED after turning key to the locked position and spinning the dial. For your security, we recommend always locking both the combination dial and key lock for the highest level of protection & security. 2