Honeywell 2070A Operating Guide - Page 5

Installing Your Wall Safe Location Your Honeywell Wall Safe should be mounted in an obscure location such as a bedroom or hall closet and must be installed in a 2' x 4' or thicker framed wall. Be sure that no plumbing pipes or electrical wires run through the wall cutout area where your wall safe is to be located and that there is room to swing the safe door open without obstruction. The Wall Safe is 14 inches wide and designed to fit between standard 16 inch center-to-center wall framing. Note: Most homes have wall framing construction of 2 x 4's and/or 2 x 6's that are located on 16-inch centers. Tools Required for Installation • Tape measure • Pencil • Drill • Jig saw or equivalent • Building square • Phillips screwdriver • Flashlight NOTE: Instructions shown are for wood framed wall installation. Installation for aluminum or steel stud walls may require pre-drilling and/or alternative mounting screws. Home and Office Security Safes 3