Honeywell 3800ISR050-0F00E User Manual - Page 21
Resetting the Standard Product Defaults, Plug and Play
![]() |
View all Honeywell 3800ISR050-0F00E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Reading Techniques The scanner has a view finder that projects a bright red aiming beam that corresponds to its horizontal field of view. The aiming line should be centered horizontally over the bar code; it will not read if the aiming line is in any other direction. Good Read Bad Read Bad Read The best focus point for reading most code densities is about 5 inches (12.7 cm) from the unit. To read single or multiple symbols (on a page or on an object), hold the imager at an appropriate distance from the target, pull the trigger, and center the aiming line on the symbol. Resetting the Standard Product Defaults If you aren't sure what programming options are in your scanner, or you've changed some options and want the factory settings restored, scan the Standard Product Default Settings bar code below. Standard Product Default Settings The Menu Commands starting on page 11-5 lists the factory default settings for each of the commands (indicated by an asterisk (*) on the programming pages). Plug and Play Plug and Play bar codes provide instant scanner set up for commonly used interfaces. 3800i/3800r User's Guide 1 - 7
![](/manual_guide/products/honeywell-3800isr050e-user-manual-549efa7/21.png)