Honeywell 3800ISR050-0F00E User Manual - Page 44
Delay Between Blocks, Overall Checksum, Secondary Laser Emulation
![]() |
View all Honeywell 3800ISR050-0F00E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Delay Between Blocks Note: This option is not applicable to Laser Emulation Raw Output (see Secondary Laser Emulation on page 6-3). This sets the delay time between data blocks. Default = 50ms. 5ms 150ms * 50ms 500ms Overall Checksum Note: This option is not applicable to Laser Emulation Raw Output (see Secondary Laser Emulation on page 6-3). When this option is turned on, a computed check character is added at the end of the entire message. The check character is the character which when Exclusive-OR'd with every preceding character of the message yields a result of 0x00 (00H). Default = Off. On * Off 2 - 14 3800i/3800r User's Guide
![](/manual_guide/products/honeywell-3800isr050e-user-manual-549efa7/44.png)
2 - 14
3800i/3800r User’s Guide
Delay Between Blocks
Note:
This option is not applicable to Laser Emulation Raw Output (see
Secondary Laser Emulation
on page 6-3).
This sets the delay time between data blocks.
Default = 50ms.
Overall Checksum
Note:
This option is not applicable to Laser Emulation Raw Output (see
Secondary Laser Emulation
on page 6-3).
When this option is turned on, a computed check character is added at the end
of the entire message.
The check character is the character which when
Exclusive-OR’d with every preceding character of the message yields a result of
0x00 (00H).
Default = Off.
5ms
500ms
* 50ms
150ms
On
* Off