Honeywell 4286 User Guide - Page 15

Confirmation of Successful System Command Entries Commands entered via the phone will be confirmed by the same number of "beeps" as those produced by the keypad for confirmation of that function (e.g., if armed STAY, 3 beeps will be heard through the phone). This will be followed by phone confirmation of successful entry of the command, using words similar to those displayed on an Alpha keypad (e.g., "ARMED STAY, EXIT NOW"). For those commands where the Phone module's vocabulary does not permit annunciation (e.g., TEST, etc.), the system will beep (as appropriate) after a successful entry, and annunciate the words "SEE SYSTEM KEYPAD." The following is a list of confirmation sounds and phone announcements that will be heard after successful command entries. System Command Function Performed Armed AWAY Armed MAXIMUM Armed STAY Armed INSTANT Disarmed Zone Bypass Enter CHIME mode Enter/Erase temporary User Code** Sound 2 beeps 2 beeps 3 beeps 3 beeps 1 beep 1 beep 1 beep 1 beep CONFIRMATION VIA PHONE Voice Announcement "ARMED AWAY, EXIT NOW* "ARMED MAX, EXIT NOW"* "ARMED STAY, EXIT NOW" * "ARMED INSTANT, EXIT NOW"* "DISARMED, READY TO ARM" or "DISARMED, NOT READY TO ARM" "BYPASS, (descriptor), ZONE #" "CHIME ON or CHIME OFF" No phone announcement * The words "EXIT NOW" simply means that you may exit during the Exit Delay period, if desired. ** Entering or erasing temporary user codes via the phone is not possible with some systems. Refer to the previous page. 11