Honeywell 4286 User Guide - Page 20

System Status Reports (cont'd) Burglary and other Alarms A status report for a Burglary or other alarm such as Panic or Emergency (current or in alarm memory) will be the same format as for a Fire Alarm above except that the word "ALARM" will be annunciated instead of FIRE. Checks A status report for a CHECK (trouble) condition will be the same format as for a Fire Alarm above, except that the word "CHECK" will be annunciated instead of FIRE. Power Status Annunciation of power status will take place only if a problem exists, as follows: If the system battery is low or is missing, "SYSTEM LOW BATTERY" will be annunciated. If AC power is absent, "SYSTEM POWER OFF" will be annunciated. Arming Status This report will indicate if the system is armed, the arming mode, and if armed with any bypasses, or if the system is disarmed and whether it is ready or not ready to arm. Annunciations when the system is in an armed state would be one of the following: "ARMED STAY", "ARMED AWAY", "ARMED INSTANT", or "ARMED MAXIMUM." If any bypasses are in effect, the word "BYPASS" will be added to the armed message. If the security system is reported as being armed and the Entry delay is active, the words "DISARM NOW" will also be annunciated; if the Exit delay is active, the words "EXIT NOW" will be annunciated. 16