Honeywell 6271CV User Guide - Page 22
How to Remove Bypassed Zones
View all Honeywell 6271CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Security System Operation (cont'd) How to Remove Bypassed Zones A bypassed zone will automatically be unbypassed when you disarm the system. If a zone is bypassed, you can remove the bypass as follows: SCREEN ACTION 1. View bypassed zones by pressing the SHOW ZONES button. While the TouchCenter is requesting and receiving the zone data from the control panel, the screen displays "Please Wait!". Then the zones, along with their current status, are displayed. 2. Remove zone bypasses by pressing the CLEAR BYPASSES button. Note: Bypassed zones are indicated by the Bypass icon . 3. The "User Authorization" screen is displayed with the instructions To Clear Bypasses, Enter Code. Note: If the system is armed and you unbypass a zone, it will disarm the system. Enter your 4-digit user code. The "More Choices" screen is displayed showing the system as Ready to Arm. Note: This will not occur if any zone(s) is open (not ready). 22