Honeywell CT3355A1003 Owner's Manual - Page 14
Set Current Time/Day, Heating Program
View all Honeywell CT3355A1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
This guide can be used for programming your new thermostat. NOTE: Batteries are required for operation and programming. When inserting batteries, set system switch to OFF. Remove the battery door (on the thermostat left side) using a coin at the bottom. Follow instructions on pages 8 and 9. Time Set Current Time/Day Set Ahead To set the time, press and release Clock/Day once, then press until current time shows; to set the day, Time Back press and release Set Clock/Day again, then press Ahead until M1699A current day shows; then press Run Program . Back M1699A Heating Program With system switch at HEAT, press and release Weekday Schedule once. WAKE, Mon-Fri and SET appear on the display. 14 69-1012
14
69-1012
This guide can be used for programming your new thermostat.
NOTE:
Batteries are required for operation and programming. When inserting batteries, set
system switch to OFF. Remove the battery door (on the thermostat left side) using a coin
at the bottom. Follow instructions on pages 8 and 9.
Set Current Time/Day
To set the time, press and release
once, then press
until current time shows; to set
the day,
press and release
again, then press
until current day shows; then press
.
Heating Program
With system switch at HEAT, press and release
once. WAKE, Mon-Fri and SET appear on
the display.
Ahead
Back
M1699A
Set
Clock/Day
Set
Clock/Day
Ahead
Back
M1699A
Run
Program
Weekday
Schedule
Time
Time