Honeywell CT3355A1003 Owner's Manual - Page 32
Troubleshooting Guide
View all Honeywell CT3355A1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Troubleshooting Guide If... Display will not come on. Temperature display will not go lower than 45°F (7°C) or higher than 88°F (31°C) during programming. Temperature change occurs at the wrong times. Heating will not come on. Then... s Set the system switch to OFF. Remove batteries. Insert backward for at least five seconds to reset thermostat. Replace batteries correctly. Display should come on. s Make sure batteries are fresh and installed correctly. s Gently clean battery contacts using a soft pencil eraser. Do not use anything abrasive on the clips. s You have reached the temperature setting limit. The setting range is 45°F to 88°F (7°C to 31°C). s Check the program times for the period in question. Be sure that AM and PM indications are correct. Make sure the current day and time are correct. Reprogram if necessary. s Check that the switch on the thermostat is set to HEAT. s Check the system fuse or circuit breaker and replace or reset if necessary. s Check for correct wiring and good connections. 32 69-1012