Honeywell CT3355A1003 Owner's Manual - Page 24
Plug the hole in the wall with insulation - security
View all Honeywell CT3355A1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
s Loosen the terminal screws and slip each wire beneath its matching terminal. See illustration (lower right) for wire insertion technique. Securely tighten the terminals. s Plug the hole in the wall with insulation to help prevent drafts from adversely affecting the thermostat operation. 5/16 in. (8 mm) STRIP INSERT STRAIGHT UNDER SCREW HEAD Rc JUMPER (FACTORYINSTALLED) REMOVE IF 5-WIRE SYSTEM R END OF WIRE VISIBLE HERE WY G M1712A 24 M3002A 69-1012
24
69-1012
■
Loosen the terminal
screws and slip each
wire beneath its matching terminal. See
illustration (lower right) for wire insertion
technique. Securely tighten the terminals.
■
Plug the hole in the wall with insulation to
help prevent drafts from adversely affecting
the thermostat operation.
M1712A
JUMPER (FACTORY-
INSTALLED) REMOVE
IF 5-WIRE SYSTEM
INSERT
STRAIGHT
UNDER
SCREW HEAD
5/16 in.
(8 mm)
STRIP
END OF WIRE
VISIBLE HERE
R
R
c
W
Y
G
M3002A