Honeywell CT3500 Owner's Manual - Page 16
Program Saturday and Sunday, Clear a Program Period, for the program period you want to clear.
View all Honeywell CT3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
The setpoint temperature range is 40°F to 90°F (5°C to 2°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling. q Heat/Cool Press Settings to switch between heating and cooling setpoints. NOTE: Program times are the same for heating and cooling. q Press or until the display shows the desired temperature setpoint. q Press , Leave Return or Sleep and repeat these steps for each time period. Your weekday is now programmed. Program Saturday and Sunday Repeat each step in Program Weekdays for Saturday and Sunday. q Run Press Program when the entire week is programmed. Clear a Program Period NOTE: Wake cannot be cleared. q Press , , or Leave Return Sleep for the program period you want to clear. q Press Day until the desired day displays (Mon-Fri Sat; Sun). q Press and hold the , Leave Return , or Sleep for approximately 3 seconds until the time and temperature clear. q Repeat the above steps for each period to be cleared. q Run Press Program . 69-1199-4 16