Honeywell CT3500 Owner's Manual - Page 17

STEP 11. OPERATING YOUR THERMOSTAT Change Temperature Setting Until the Next Program Period (Temporary Change) q Press or until the screen shows the desired temperature setting. NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is displayed. Temporary appears in the display. The setting cancels when the next program period starts or when you press Run Program . Change Temperature Setting Indefinitely (Hold) q Move the System switch to the desired position (Heat or Cool). q Press Hold Temp then or to change your setting if desired. (The display changes from showing the setpoint temperature to room temperature after approximately three seconds). q Run To cancel "Hold" press Program . Change the Temperature Setting Until a Designated Day and Period (Vacation Hold) q Press Hold Temp twice. q Press or until the display shows the desired temperature setpoint. q Press Time until the desired number of days that you will be away (1 through 255) is displayed. q Press , Wake , Leave Return or Sleep to select the program period when you want the program to restart. NOTE: If the Vacation Hold needs to be cancelled before the designated time, press Run Program to return to the program. 17 69-1199-4