Honeywell HWM910 Owners Manual - Page 9
End-of-the-season Care And Storage, Cleaning The Heating Element
![]() |
UPC - 092926343101
View all Honeywell HWM910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CLEANING THE HEATING ELEMENT If the unit stops producing mist, even while there is water in the tank, the mineral build-up may need to be removed from the heating element of the Power Unit. How often you perform this special maintenance depends upon the hardness of the water you are using and how quickly mineral deposits form on the interior surfaces of the humidifier. DO NOT clean the heating element under running water. Doing so may cause damage or personal injury. 1. Unplug the humidifier. Allow at least 10 minutes for the unit to cool. 2. The heating element is on the bottom of the Power Unit. To access it, remove the Power Unit by pulling on the Latch (found under the Water Tank) and lifting the Power Unit (Fig. 6). Fig.7 3. Turn it upside down. BE SURE IT HAS COOLED SUFFICIENTLY. 4. Use a non-metallic brush or a soft, dry cloth to wipe the outer surfaces of the heating element (Fig. 7). Some deposit may remain, but should not interfere with the operation of the unit. Heating Element END-OF-THE-SEASON CARE AND STORAGE • Follow WEEKLY CLEANING instructions when the humidifier will not be used for at least one week or more, or at the end of the season. • Dry the humidifier completely before storing. DO NOT store with water inside the Removable Tray, Base, or Water Tank. • Pack the unit in its original carton and store in a cool, dry location. • Before next use, remember to clean the humidifier.
![](/manual_guide/products/honeywell-hwm910-owners-manual-443efbc/9.png)