Honeywell T8611 Owner's Manual - Page 4

Press and hold until the display shows the desired temperature. If the display starts to blink while you are holding down TEMPERATURE WARMER or COOLER, you have reached the setting limit. If your thermostat can switch automatically between heating and cooling, the heating temperature must be at least 3 degrees below the air conditioning temperature. For example, if the cooling setting is 75" F, the maximum heating setting is 72" F. Program the LEAVE time and temperature, if desired. NOTE: You can cancel the LEAVE. RETURN or SLEEP program by holding down the period key until the time and temperature disappear from the display. M. . -. El Press and release. The display shows LEAVE, but no time or temperature. Press and hold until the display shows the desired starting time. Press and hold until the display shows the desired temperature. 4