Honeywell TE653ELW User Manual - Page 13

Backlight, Troubleshooting, Precautions, Specifications - user manual

Page 13 highlights

If the alarm is not disabled after that, it will sound for two more minutes and then will stop by itself. BACKLIGHT The backlight feature is enabled only after the time is set. To activate the backlight press the SNOOZE/LIGHT button once, and both - clock and weather station displays - will light up for five seconds. TROUBLESHOOTING Check here before contacting customer service. Issue Main unit Main unit Remote sensor Symptom US Atomic Time signal is not received The weather readings weather station are different from the TV, radio or official weather reports Cannot locate remote sensor Solution Place unit by the window and keep it there overnight The weather data may vary considerably due to different environmental conditions and placement. Check the placement tips included in this manual to site your weather sensors in the best possible way. Check batteries Check location Cannot change the channel Cannot change the C° to F° and back Data does not match data on the main unit Press and hold DOWN ( ▼) button on the main unit to search for the signal from the remote sensor Press "RESET" after setting the channel Press "RESET" after setting C/F Initiate manual sensor search (Press and hold DOWN ( ▼) button on the main unit) 25 PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions: • Do not immerse the units in water. • Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits. • Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts. • Do not tamper with the units internal components. Doing so will invalidate the warranty and may cause damage. These units contain no user-serviceable parts. • Use only fresh batteries. Do not mix new and old batteries. • Read the user's manual thoroughly before operating the units. SPECIFICATIONS Main Unit Radio Frequency: 433 MHz RF Reception range: 100 feet (30 m) Weather Forecast in five large graphic icons: Sunny, Partly Cloudy, Cloudy, Rainy and Snowy Barometric Pressure Measuring Range: 14.75 inHg to 32.44 inHg (500 Hpa to 1100Hpa); (374.5 mmHg to 823.8 mmHg) Resolution:0.003 inHg (0.1 Hpa, 0.08 mmHg) Sampling interval: 20 minutes Altitude Compensation Range: -656 ft to 3999 ft (-200m to +1219 m) Indoor Temperature Operating Range: 23°F to 122°F (-5°C to 50°C) Resolution: 0.2°F (0.1°C) Indoor Humidity Operating Range: 30% to 80% Resolution: 1% Comfort level indicators - COMFORT, WET and DRY 25 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

25
25
If the alarm is not disabled after that, it will sound for two more minutes and
then will stop by itself.
BACKLIGHT
The backlight feature is enabled only after the time is set.
To activate the backlight press the
SNOOZE/LIGHT
button once, and both –
clock and weather station displays - will light up for five seconds.
TROUBLESHOOTING
Check here before contacting customer service.
Issue
Symptom
Solution
Main unit
US Atomic Time signal is
not received
Place unit by the window and keep it
there overnight
Main unit
The weather readings
weather station are
different from the TV, radio
or official weather reports
The weather data may vary
considerably due to different
environmental conditions and
placement.
Check the placement tips included in
this manual to site your weather
sensors in the best possible way.
Check batteries
Cannot locate remote
sensor
Check location
Press and hold
DOWN
(
) button on
the main unit to search for the signal
from the remote sensor
Cannot change the
channel
Press “
RESET
” after setting the
channel
Cannot change the C° to
F° and back
Press “
RESET
” after setting C/F
Remote sensor
Data does not match data
on the main unit
Initiate manual sensor search (Press
and hold
DOWN
(
) button on the
main unit)
26
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled
carefully. Here are a few precautions:
Do not immerse the units in water.
Do not clean the units with abrasive or corrosive materials. They may
scratch the plastic parts and corrode the electronic circuits.
Do not subject the product to excessive force, shock, dust, temperature,
or humidity, which may result in malfunctions, shorter lifespan,
damaged batteries, and damaged parts.
Do not tamper with the units internal components. Doing so will
invalidate the warranty and may cause damage. These units contain no
user-serviceable parts.
Use only fresh batteries. Do not mix new and old batteries.
Read the user's manual thoroughly before operating the units.
SPECIFICATIONS
Main Unit
Radio Frequency
: 433 MHz
RF Reception range
: 100 feet (30 m)
Weather Forecast
in five large graphic icons: Sunny, Partly Cloudy, Cloudy,
Rainy and Snowy
Barometric Pressure
Measuring Range: 14.75 inHg to 32.44 inHg (500 Hpa to 1100Hpa); (374.5
mmHg to 823.8 mmHg)
Resolution:0.003 inHg (0.1 Hpa, 0.08 mmHg)
Sampling interval: 20 minutes
Altitude Compensation Range: -656 ft to 3999 ft (-200m to +1219 m)
Indoor Temperature
Operating Range: 23°F to 122°F (-5°C to 50°C)
Resolution: 0.2°F (0.1°C)
Indoor Humidity
Operating Range: 30% to 80%
Resolution: 1%
Comfort level indicators –
COMFORT
,
WET
and
DRY