Hoover F5914 900 Product Manual - Page 9

2.10 Unlatch back part of tank lid and remove lid. Empty tank. Pour dirty water out from the rear of the tank (F). 2.10 The lid replaces in a hinge-like manner. Position the front of lid under tabs (G) on front of tank. Rotate lid G down onto tank. Make sure that the lid is secure on all sides before placing tank on cleaner. F IMPORTANT For full suction, it is important that the Dirty Water Tank lid is properly secured before cleaning. Brush Speed Selector Your SteamVac® carpet cleaner has three agitator brush settings. Hl - for normal cleaning of carpet and bare floors LO - for gentle cleaning of carpets and bare floors OFF - for cleaning carpets and bare floors when brushing is not desired. (See "Picking Up Spills" section on page 11.) Slide selector button to the desired setting before cleaning. 2.11 OAFgFitatoLrOSHpIeed 2.12 Brush indicator 2.12 The brush indicator will spin (F) when the carpet cleaner is turned ON and the brushes are rotating. F If the indicator does not spin and the pattern is visible (G) when the carpet cleaner is turned ON, the brushes are not rotating. There are three reasons why the brushes may not be rotating: G 1. Brush speed selector set on OFF (see previous section). 2. Solution tube connected (Available on select models only) (Fig. 4.5). 3. Brush indicator screen dirty. 2.13 To clean screen (H), turn carpet cleaner off and disconnect from electrical outlet. Remove clear cover and wipe off screen with a damp cloth. Snap cover back into position. 2.13 H 9 Actual model may vary from images shown.