Hoover F7458-900 Product Manual - Page 12

Picking up spills Your HOOVER® SteamVac® cleaner may also be used to pick up small liquid spills on carpet or uholstery. For best results, pick up spills immediately by placing the stair/upholstery nozzle just above the spill and suction up any residue on top of the carpet. If the spill remains, place either the stair/ upholstery nozzle or floor nozzle with the SpinScrub® mode selector to SPILL PICK-UP in front of the spill, pull the nozzle very slowly over the spill initially with suction only. Repeat with spray and suction. If a spot is left, the stair/upholstery nozzle is generally more effective for removing it. Although no cleaning solution can completely remove all spots, they can be treated by following the instructions provided by the manufacturer of the carpet, upholstery, or hard floor surface being cleaned. Do not use the SteamVac® cleaner to pick up flammable or combustible liquids or chemicals. When finished, follow "After Cleaning" instructions. After cleaning Allow carpet or upholstery to dry. To help prevent matting and resoiling the carpet, keep children and pets away from surface until it is completely dry. If it is necessary to walk on damp carpet, place towels or white cloths on the traffic areas. If furniture must be replaced before the carpet is dry, place plastic or aluminum foil under legs of furniture so metal slides or wood finishes will not stain the carpet. Empty tanks, rinse with clean water and let air dry. Rinse the Dirty Water Tank lid and let air dry. 3.4 Remove lint from filter screen located inside Dirty Water Tank. 3.5 Remove lint from filter screen located on bottom of cleaner. IMPORTANT When brushes seem to be rotating slowly, disconnect cleaner from electical outlet and check and clean this screen. 3.4 3.5 Actual model may vary from images shown. 12