Hoover F7458-900 Product Manual - Page 8
Caution, Important - clean water tank
View all Hoover F7458-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
SpinScrub® mode selector Your SteamVac® cleaner has two agitator brush settings. SPILL PICK-UP - brushes OFF for picking up spills or cleaning carpets and hard floors when brushing is not desired. POWER SCRUB - brushes at maximum speed for cleaning carpets Slide setting selector to the desired setting before cleaning. 2.6 The tanks: 2.7 2.8 E Clean Water Solution Tank D (upper tank) C 2.7 The clean water tank (C) holds the water that will either be mixed with detergent for cleaning the carpet or floor, or used to rinse the carpet or floor. The detergent container (D) is permanently attached to the water tank. It holds the detergent that mixes with the water. How to Fill Unplug cleaner from electrical outlet. To remove tank, press down on tank handle and pull forward. 2.9 F 2.10 2.8 Fill tank (E) with hot tap water. ! CAUTION ! Do not fill with water above 140°F (60°C). 2.9 - 2.10 Fill detergent container (F) with Hoover® Carpet/Upholstery Detergent. Replace container cap and tighten. 2.11 Position bottom of tank onto cleaner using one hand on each side of the tank to center it on the unit. 2.11 IMPORTANT The tank pivots towards the back of the unit. Push the top of the tank and tank handle while supporting the back of the unit with your other hand. IMPORTANT Use only HOOVER® SteamVac® detergents. They are specially formulated for use with your SteamVac® cleaner. Non-Hoover® cleaning solutions may harm the machine and void the warranty. Actual model may vary from images shown. 8