Hoover F8100900 Product Manual - Page 22

TROUBLESHOOTING 5. TROUBLESHOOTING WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING PROBLEM Cleaner won't run. Low suction. POSSIBLE CAUSE Not firmly plugged in. No voltage in wall plug. Blown fuse or tripped breaker. Recovery tank full/automatic shut off engaged. Blockage in tool on end of hose. POSSIBLE SOLUTION Plug unit in firmly. Check fuse or breaker. Replace fuse or reset breaker. Remove and empty recovery tank. Remove tool and clear blockage. Recovery tank lid not on correctly. Make sure lid is on securely. Hose end not inserted properly. Clean water Clean water tank not firmly in place. won't dispense. Clean water tank or detergent container empty. Insert hose end firmly into hose pocket. Make sure tank is securely locked in position. Refill container according to instructions for surface being cleaned. Recovery tank full / automatic shut-off engaged. Empty recovery tank. Detergent Detergent tank empty. won't dispense. Clean Water tank Tank is empty. light is "ON". Water is "soft" and not detected by sensor. Detergent tank Tank is empty. light is "ON". Detergent not detected by sensor. Fill detergent tank. Fill water tank. The cleaner will continue to operate normally. Fill detergent tank. The cleaner will continue to operate normally. Brushes do not Spill pick-up mode selected. spin. Object/debris has jammed brushes. Change mode to Wash/Auto Rinse, Rinse Only, Spot Clean. Overload sensor has tripped. Turn cleaner off, remove obstruction and/or clean brushes. ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE. Exclusive Hoover Platinum Collection™ Member Services Line 1.877.MYPLTNM (1.877.697.5866) In the event that further assistance is required, see your Yellow Pages for an authorized HOOVER® Dealer or visit our website at www.hoover.com. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized HOOVER® Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.) 21