Hoover Power Scrub Deluxe Product Manual - Page 25
Tools
View all Hoover Power Scrub Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TOOLS CONNECT HOSE FOR TOOL USE 33 34 ! CAUTION ! Always turn off appliance before connecting C or disconnecting hose. How to Attach 1. Open Accessory Hose Suction Port (A, Fig. 33). Insert hose end, aligning the indicator with the unlock arrows. 2. Rotate clockwise to lock position (B, Fig. 33). 3. Hold open the Accessory Hose Solution Port door (Fig. 32). 4. Plug Accessory Hose Solution Tube connector firmly into Hose Solution Port (C, Fig. 34). How to Remove 1. Disconnect Accessory Hose Solution Tube Connector from Accessory Hose Solution Port by pulling up firmly. Do not pull on tube, this may cause damage. Accessory port door will automatically close. A B 2. Rotate accessory Hose end counterclockwise from the locked position to the unlocked position and remove by pulling out. 3. Snap Accessory Hose Suction Port door back into place. Make sure to snap both sides to unsure proper suction, unit may lose suction if not closed properly. TOOLS (*Available on select models only.) A. Stair Tool*: 6 inches wide, 2 built-in rows of brushes to help provide the scrubbing action that some spots may need for removal on your carpeted stairs. B. Upholstery Tool has a built-in brush to help provide the scrubbing action some spots may need for removal. C. SpinScrub® Hand Tool* has rotating brush(s) for extra scrubbing action on small carpet areas, carpeted stairs and upholstery. For some models, the brush(s) can be removed for converting to the scrub module. 35 B D D. Crevice Tool*: Great for use around baseboards and those hard to reach areas. NOTE: Tools located and stored in Mesh Bag. 36 How to Attach Tools ! CAUTION ! To reduce the risk of injury from moving parts - Unplug before connecting SpinScrub Hand tool. Not to be used for grooming pets. 1. To ensure maximum performance and to protect your carpet, be sure to place the handle in the upright position while using the accessory hose. Placing handle in the upright position shuts off the SpinScrub brushes. NOTE: All tools attach to the hose in the same manner: 2. Connect tool to hose by sliding it onto connector until the tab locks it securely (E, Fig. 36). 3. Using your thumb, push forward and up on the latch to remove tool (F, Fig. 36). Actual model may vary from images shown. 13 C A E F