Hoover UH20060 Manual - Page 4

If you need assistance: Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® authorized dealer locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8am - 7pm EST. Please do not return this product to the store. 1. Cleaner assembly Carton contents 1-1 A C A. Handle section B. Cleaner C. Crevice wand & dusting brush D. Hose Remove all parts from carton and D identify each item shown. Make sure all parts are located before B disposing of packing materials. Attach handle 1-2 A Position hose 1-3 B Attach hose 1-4 C D Press button (A) on back of handle base and push handle down until metal button on handle snaps out. Press button (A) to raise and lower the handle. The hose is packed in a plastic bag for shipping. Remove hose from bag before assembly. Position hose over rack and into hose tube (B). NOTE: Hose must be connected at the hose tube (B) and at the dirt duct (D) on the back of the cleaner for carpet or floor cleaning. For tool use, refer to Fig. 2-11 and 2-13. Align end of hose with projections (C) over slots on dirt duct (D). Slide hose into slots and twist hose to lock it into place (To detach hose, reverse procedure). 4