Hoover UH20060 Manual - Page 7

Cleaning lightweight, flexible rugs, Cleaning tools

Page 7 highlights

Cleaning lightweight flexible rugs Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) and will prevent rug from clinging to cleaner. Continue to lift up nozzle so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower nozzle, and use only forward strokes. Cleaning tools 2-11 Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas. A The cleaner is ready for tool use B when handle is in upright position. Removing hose When using cleaning tools, place cleaner handle in the upright position. Turn cleaner OFF before disconnecting and connecting hose to hose tube (A). Twist hose end (B) to remove hose. When you are finished cleaning with the tools, reposition hose end into tube and twist to secure in place. 2-12 2-13 E C 2-14 D Select proper tool C. Dusting brush use for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shutters, and registers. D. Crevice wand may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards. Attach the dusting brush to the end of the crevice wand for extra reach. NOTE: For extended above-floor tool use, it is recommended to turn the agitator brushroll OFF. Step on the agitator brushroll pedal to turn the agitator to "BARE FLOOR" setting. Attach wand and tools Attach tool or crevice wand to the hose by aligning the the tab on the hose (E) with the slot on the tool and twisting to secure in place. To remove tool or wand, twist to unlock. How to clean tools To clean the hose, wipe off dirt with a cloth dampened in a mild detergent. Rinse with a damp cloth. Cleaning tools may be washed in warm water with a detergent. Rinse and air dry before using. Stair cleaning handle Grasp cleaner by the stair cleaning handle. Clean stairs from bottom to top. CAUTION: To avoid personal injury or unnecessary wear to carpet, and to prevent the cleaner from falling, always place it at bottom of stairs. Continued ➜ 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

Attach wand and tools
Attach tool or crevice wand to the
hose by aligning the the tab on the
hose (E) with the slot on the tool and
twisting to secure in place.
To remove tool or wand, twist to
unlock.
Stair cleaning handle
Grasp cleaner by the stair cleaning
handle. Clean stairs from bottom to
top.
CAUTION: To avoid personal inju-
ry or unnecessary wear to carpet,
and to prevent the cleaner from
falling, always place it at bottom
of stairs°
7
Cleaning lightweight
flexible rugs
Stand on one end of rug and move
cleaner toward other end or edge.
Before reaching edge, push down on
handle. This will lift up the nozzle
(front of cleaner) and will prevent rug
from clinging to cleaner. Continue to
lift up nozzle so that when you have
reached the edge, it is completely off
the rug. Move cleaner back to start
again, lower nozzle, and use only for-
ward strokes.
Cleaning tools
Tools allow for cleaning surfaces
above the floor and for reaching hard
to clean areas.
The cleaner is ready for tool use
when
handle is in upright position
.
How to clean tools
To clean the hose, wipe off dirt with a
cloth dampened in a mild detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in
warm water with a detergent. Rinse
and air dry before using.
B
D
E
C
A
2-11
Removing hose
When using cleaning tools, place
cleaner handle in the upright posi-
tion°
Turn cleaner OFF before dis-
connecting and connecting hose
to hose tube (A)°
Twist hose end (B) to remove hose.
When you are finished cleaning with
the tools, reposition hose end into
tube and twist to secure in place.
Select proper tool
C° Dusting brush
use for carved fur-
niture, table tops, books, lamps, light-
ing fixtures, venetian blinds, base-
boards, shutters, and registers.
Crevice wand
may be used in
tight spaces, corners and along
edges in such places as dresser
drawers, upholstered furniture, stairs
and baseboards.
Attach the dusting brush to the end
of the crevice wand for extra reach.
NOTE: For extended above-floor
tool use, it is recommended to
turn the agitator brushroll OFF°
Step on the agitator brushroll
pedal to turn the agitator to
“BARE FLOOR” setting°
2-12
2-14
Continued
2-13