Hotpoint HDA3600RWW Owners Manual - Page 10

Operation of electronic models (model GSD4000 Only) Using the Dishwasher Door door must be closed and locked into place to select a LOADSELECTIONor an OPTION. Ifthe door is opened during a cgcle and left open, the dishwasher willbeep once every 30 seconds until the .... door is cosed and atched into p ace. Start Close and latch the door. Touch the START/RESETpod to begin the cgcle. Water fill begins and opproximatelg 60 seconds later the wash action begins. NOTE:The dishwasher remembers gour last cgcle so gou don't hove to reprogram each time. When the dishwasher is loaded and the door latch is in the locked position, the control panel lights will be ON and displag the last settings gou selected. If gou don't wont to change ang of the settings, simplg touch the START/RESETpad to begin the cgcle. Also, if a power failure occurs, NORMAL and HEATEDDRY will automatically be programmed. Hake ang new selections and touch the START/RESETpad to begin the cgcle. Cleon This light is illuminated when o wash cgcle is complete. The light will stag ON until the door is opened. Flashing Display Lights Lights What It Means This is normal. The START/RESETpad has been pressed. What To Do Allow the dishwasher to drain and reset before gou start a new wash cgcle. CLEAN Control Error Pressthe START/RESEpTad to turn off the beeper. If the CLEAN light continues to flash, coil for service. PLUS A BEEPING SOUND Control Error PLUS A BEEPING SOUND Pressthe START/RESEpTad to turn off the beeper and the dishwasher will attempt to reset. Restart the wash cgcle. If this error continues, turn off the power to the dishwasher at the circuit breaker for 30 seconds. Trg the dishwasher again. If the error is still present, coil for service. 10