Hotpoint HTR17BBSRWW Owners Manual - Page 13

Installation instructions REVERSING THE DOOR SWING IMPORTANT NOTES _,_]_en re\'e_ing the door swing: • Read the instructions starting, all the way through heft)re • Handle parts carefifllv to avoid scratching paint, • Set screws down by their related them in the wrong places. parts to avoid using • Provide a non-scratching the dome. work sm'tace ti)r IMPORTANT: Once you begin, do not move the cabinet tmtil doo>swing reversal is completed. These instructions are fi)r changing the hinges fl'om the right side to the lett side--if vou ever want to change the hinges back to the right side, ti)llow these same instructions and reverse all reterences to lett and right. TOOLS REQUIRED [] REMOVE THE FREEZER DOOR 2.1 Tape the door shut with maskino. _ tape. 2.2 _ith a 5/16" hex-head socket drixer, relnoxe the screws that hold the top hinge to the cabinet. 2.3 i,ift the hinge, up to free the the top of the its screws. (and hinge door the shim glued to it) ,strai,*ht pin from the socket in and set it aside, ahmg with TopHinge_L'_ W"_ I Phillips screwdriver Masking tape 5/16" he>head socket driver T20 or T25 Torxdriver (needed forsome models) 2.4 Remoxe cabinet. the tape and tilt the door awax from the I,ift it off the center hinge pin. Putty knife or thin-blade screwdriver 5/16" open-end wrench [] BEFORE YOU START 1.1 Unplug outlet. the refrigerator from its electrical 1.2 Empty COII/l)}l all door shelves, I'tll/en t. including the dairy CAUTION: Do not let either flora; To do so could damage door drop to the the door stop. 2.5 Set the door on a non-scratching the outside up. surfi_ce with 2.6 Transfer the 2 screws from the opposite side of the cabinet to the screw holes xacated by the top hinge remoxal. 13