Hotpoint HTR17BBSRWW Owners Manual - Page 15

Reversing, The Hardware, Cont., The Door, Handles

Page 15 highlights

Installation instructions [] REVERSING THE HARDWARE (CONT.) 4.2 Interchange hinge (and the shim glued to it) and screws at top right with screws at top left of cabinet. Do not tighten screws on hinge side at this time. [] REVERSING THE DOOR HANDLES ICONT.I 5.1 Transfer fresh food door handle (cont.) 5.1.4 _]th tai_e-tii_ped putty knife or thin-blade screwdriver; pry out the i)lug button from the hinge hole on the left side of the door and insert it into the hole on the opposite side that was w_cated bv remowfl of the top hinge. Installingthe hingeon the left. Installingthe hingeon the right. NOTES: • Some hinges have fimr holes. Which holes wm use fin" installing the hinge depends on which side you install the hinge. • The outer edge of the hinge should be parallel to the edge of the case for correct installation. [] REVERSING THE DOOR HANDLES 5.1 Transfer fresh food door handle 5.1.1 Remove the handle i_lug using a tai)e-tii)ped putty knife under the edge, and remove the screw underneath. Remove the two screws holding the handle to the top of the door. Plug,_ I 5.1.2 Remoxe the handle. 5.1.3 Remo_e the screws from the rioht_ edge, of the door top and insert them into the handle screw holes on the opposite side. PlugBu_ 5.1.5 Pull the plug button fl'om the front of the door and transfer it to the opposite side. PlugButton To reattachthe handleon the oppositeside. 5.2 Transfer door stop 5.2.1 Move the metal door stop lI'OIll the right end to the left end. DoorStop LeftSide_°___ 5.2.2 Moxe any scFews fI'OIIl the left end to the right end. RightS__ 5.3 Reinstalling the Fresh Food Door Handle 5.3.1 Attach the handle to the right side of the door with screws at the top and trader the handle _lu, _.._ I - -=_ _"' 5.3.2 Reinstall the handle i)lug. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Installation
instructions
I
[]
REVERSING
THE HARDWARE
(CONT.)
4.2
Interchange
hinge
(and
the
shim
glued
to
it)
and
screws
at
top
right
with
screws
at
top
left
of
cabinet.
Do
not
tighten
screws
on
hinge
side
at
this
time.
Installingthe hingeon the left.
Installingthe hingeon the right.
NOTES:
Some
hinges
have
fimr
holes.
Which
holes
wm
use
fin" installing
the
hinge
depends
on
which
side
you
install
the
hinge.
The
outer
edge
of
the
hinge
should
be
parallel
to the
edge
of
the
case
for
correct
installation.
[]
REVERSING
THE DOOR
HANDLES
5.1
Transfer
fresh
food
door
handle
5.1.1
Remove
the
handle
i_lug
using
a tai)e-tii)ped
putty
knife
under
the
edge,
and
remove
the
screw
underneath.
Remove
the
two
screws
holding
the
handle
to
the
top
of the
door.
Plug,_
5.1.2
Remoxe
the
handle.
5.1.3
Remo_e
the
screws
from
the
rioht_
edge,
of
the
door
top
and
insert
them
into
the
handle
screw
holes
on
the
opposite
side.
[]
REVERSING
THE DOOR
HANDLES
ICONT.I
5.1
Transfer
fresh
food
door
handle
(cont.)
5.1.4
_]th
tai_e-tii_ped
putty
knife
or
thin-blade
screwdriver;
pry
out
the
i)lug
button
from
the
hinge
hole
on
the
left
side
of
the
door
and
insert
it into
the
hole
on
the
opposite
side
that
was
w_cated
bv remowfl
of
the
top
hinge.
PlugBu_
5.1.5
Pull
the
plug
button
fl'om
the
front
of the
door
and
transfer
it
to the
opposite
side.
PlugButton
Toreattachthe
handleonthe
oppositeside.
5.2
Transfer
door
stop
5.2.1
Move
the
metal
door
stop
lI'OIll
the
right
end
to
the
left
end.
DoorStop
Left
Side_°___
5.2.2
Moxe
any
scFews
fI'OIIl
the
left
end
to
the
right
end.
RightS__
5.3
Reinstalling
the
Fresh
Food
Door
Handle
5.3.1
Attach
the
handle
to
_.._
the
right
side
of
the
I
-
-=_
door
with
screws
at
the
top
and
trader
the
handle
_lu,
_"'
5.3.2
Reinstall
the
handle
i)lug.
15