Hotpoint HTR17BBSRWW Owners Manual - Page 14

Installation Instructions B REVERSING THE DOOR SWING (CONT.) [] REMOVE THE FRESH FOOD DOOR 3.1 Tape the door shut with masking tape. [] REMOVE THE FRESH FOOD DOOR (CONT.) 3.5 Transfer the two screws ti'om the opposite side of the cabinet to the screw holes \_cated by the center hinge remowd. 3.6 Transfer the washer (if your model has one) to the opposite side. 3.2 Using a 5/16" hex-head socket screwdriver and a 5/16" open-end wrench, remove the two screws holding the center hinge (and the shim glued to it) to the cabinet. I,ifl the center hinge to fl'ee its pin from the socket in the top of the door, and set hinge and screws aside. Be cm'eful not to lose the center hinge spacer mad washer. 3.7 %_ke one of the scre_vs removed in step 2 and start it in the outeHnost screw hole on the opposite side. Do not drive it all the way down--leave enough space under the screw head fin" thickness of shim and bracket. 3.3 Remove the tape and tilt the door away from the cabinet. I,ifl the door fl'om the pin in the bottom hinge bracket. (If the plastic washer sticks to the door bottom, put it back on the hinge.) [] REVERSING THE HARDWARE 4.1 Moxe die t)ottom hinge bracket (and shim glued to it) and plasti( D(_tsh(!_ltt'()l// 111(r!ight side to the lefl side. /I I Plastic _'_[ I Switchthe hingepin to the ¢1 ¢-._ I oppositesideof the bracket. [_. -_1_ _*-. W/ asher _'_ Hinge_ -_ Bracket 3.4 Set the door outside-up on a non-scratching suHi_ce. 14