Huawei MT883 User Manual - Page 12

3 Setting the Network-Access Parameters By configuring the MT883 and the computer, you can choose any of the following methods to surf the Internet: z Accessing the Network Through the Embedded PPP Dial-Up Software of the MT883 z Accessing the Network Through the PPP Dial-Up Software on the Computer 3.1 Accessing the Network Through the Embedded PPP Dial-Up Software of the MT883 If you select this method for accessing the network, the MT883 starts to set up dial-up connection automatically after the startup. You can access the network after you power on the computer. You do not need to install any special dial-up software on the computer or perform the dial-up operations on the computer. To configure the MT883 and the computer for the network access, do as follows: Step 1 Log in to the Web configuration page. 1. Launch the Internet Explorer on the computer. Enter http://192.168.1.1 in the address bar and press Enter. 2. In the displayed dialog box, enter the user name and the password, and then click OK. By default, both the user name and the password are admin. After the password is verified, you can access the Web configuration page. Step 2 Enable the embedded dial-up function. 1. In the navigation tree on the left of the configuration page, choose Basic > WAN Setting. 2. Select a PVC number, such as 1, from the PVC drop-down combo box. 3. In the VPI and VCI text boxes, enter the VPI and VCI values that are provided by the network operator . 4. Select Yes from the Active drop-down combo box and select Routing from the Mode drop-down combo box. 5. Enter the operator name, user name, and password in the Login Information dialog box and keep the default settings of other parameters. 6. Click Submit to save the settings. After you complete the preceding settings, you can surf the Internet. You need to perform the preceding operations only once. The next time when you power on the computer, you can surf the Internet without performing any configuration. 7