Hunter 28484 Operation Manual - Page 10

7 • Installing the Switch Housing 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8" housing assembly screws into the switch housing mounting plate. 7-2. Feed the upper plug connector through the center opening of the housing. 7-3. Align the keyhole slots in the housing with the housing assembly screws. 7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining #6-32 x 3/8" screw into the housing. Tighten all three screws firmly. Steps 7-1 - 7-3 Housing Assembly Screw 10 Upper Switch Housing Step 7-4 Hunter Fan Company 42501 Sunset Boulevard.indd 10 10/24/2005, 11:05 AM 42501-01 • 10/24/05