Hunter 28484 Operation Manual - Page 7

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 4-2. To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist clockwise until tight. 4-3. Connect the wires as follows: • Connect the green ground wire from the fan to the ground wire from the ceiling • Connect the white wire from the fan to the common wire from the ceiling • Connect the black wire and the black and white striped wire from the fan to the black wire from the ceiling CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-4. Push all wires and wire nuts back through the ceiling plate hole into the outlet box. 4 • Wiring the Fan Step 4-3 7 Wire Nut 42501-01 • 10/24/05 42501 Sunset Boulevard.indd 7 10/24/2005, 11:04 AM Hunter Fan Company