Hunter 28484 Operation Manual - Page 8
Should you need to remove the canopy, trim ring
View all Hunter 28484 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5 • Installing the Canopy and Canopy Trim Ring Step 5-2 Canopy Ceiling Plate Canopy Trim Ring 5-1. Holding the canopy, raise the fan off the hook. 5-2. Align the slots in the canopy with the tabs on the ceiling plate. 5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 5-4. Loosely assemble the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them. 5-5. Using both hands, push the canopy trim ring up to the top of the canopy. e canopy trim ring will snap and lock into place. 8 Steps 5-4 - 5-5 Step 5-3 Should you need to remove the canopy trim ring, follow these steps: 1. Locate the tab indicators, small bumps on top of tabs. 2. Press firmly on opposite sides of the ring towards the canopy. e tabs will flex out releasing the trim ring from the canopy. Hunter Fan Company 42501 Sunset Boulevard.indd 8 Canopy Screw 10/24/2005, 11:04 AM 42501-01 • 10/24/05