Hunter 28484 Operation Manual - Page 9

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Install three blade assembly screws through the the blade iron and blade, into the medallion. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. 6-3. Remove the blade armature screws and rubber shipping bumpers from the motor. Save the screws for the following step and discard the shipping bumpers. 6-4. For each blade, insert one blade armature screw through the blade iron, and attach loosely to the fan. Insert the second blade armature screw, then securely tighten both armature screws. Steps 6-1 - 6-2 Blade Assembly Screws 6 • Assembling the Blades Step 6-4 9 42501-01 • 10/24/05 42501 Sunset Boulevard.indd 9 Blade Armature Screw 10/24/2005, 11:05 AM Hunter Fan Company