Husqvarna 128DJx Owners Manual - Page 13

FUEL HANDLING Fuel safety Never start the machine: 1. If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. 2. If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water. 3. If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines. Transport and storage S Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers. S When storing and transporting fuel always use approved containers intended for this purpose. S When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to find out where to dispose of excess fuel. S Ensure the machine is cleaned and that a complete service is carried out before long--term storage. S The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage. S In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long--term storage, if the machine is not under close supervision and when performing all service measures. WARNING: Take care when han- dling fuel. Bear in mind the risk of fire, explosion and inhaling fumes. Fuel CAUTION! The machine is equipped with a two--stroke engine and must always be run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture. WARNING: Fuel and fuel fumes are highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation. Gasoline CAUTION! Always use high quality unleaded gasoline. S This engine is certified to operate on unleaded gasoline. S The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87, "knocking" can occur. This leads to an increased engine tempera- ture, which can result in a serious engine breakdown. S When working at continuous high revs, a higher octane rating is recommended. Two--stroke oil S For best results and performance, use HUSQVARNA two--stroke oil, which is specially formulated for our two--stroke engines. Mixture 1:50 (2%). S To maximize the life of your trimmer, you may choose to use a high quality synthetic oil formulated for two--stroke engines. Mixture 1:50 (2%). S Never use two--stroke oil intended for water--cooled outboard engines, sometimes referred to as outboard oil. S Never use oil intended for four--stroke engines. Gasoline U.S. gallon 1 2 1/2 5 Two- stroke oil 2% (1:50) U.S. fl. oz. 2 1/2 6 1/2 12 7/8 577387001 Rev. 2 1/6/11 English--- 13