Husqvarna 128DJx Owners Manual - Page 16

STARTING AND STOPPING Stopping Stop the engine by pushing and holding the stop switch in the STOP position until the engine stops. NOTE: If engine dies, return blue engine choke lever to the closed position and repeat starting steps. CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. WARNING: When the engine is started with the choke in the closed position the cutting attachment will start to rotate immediately. Warm engine With a warm engine, move the blue engine choke lever to the ½ position. Pull starter rope until engine runs. Move the blue engine choke lever to the opened position. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap. 577387001 Rev. 2 1/6/11 English--- 16