Husqvarna 525iLST Owner Manual - Page 10
To start the product on, Troubleshooting
View all Husqvarna 525iLST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. 2. Push the power trigger lockout forward (A) and down. Hold the power trigger lockout against the handle (B) and make sure that it returns to its original position when you release it. B A To do a check of the power trigger lockout The power trigger lockout is designed to prevent accidental operation. When you push the power trigger lockout forward (A) and then press the power trigger lockout against the handle (B), the power trigger (C) is released. When you release the handle, the power trigger and the power trigger lockout both move back to their original positions. This movement is operated by three independent springs. 3. Make sure that the power trigger and the power trigger lockout moves freely and that the return springs operate properly. B A C 1. Make sure that the power trigger is locked when the lock is in its original position. 4. Start the product, refer to To start the product on page 14. 5. Push the power trigger fully to apply full speed. 6. Release the power trigger and make sure that the cutting attachment stops and remains still. To do a check of the user interface 1. Press and hold the start/stop button (A). a) The product is on when the display (B) comes on. B A b) The product is off when the display goes off. 2. If the warning indicator on the display is on or flashes, refer to Troubleshooting on page 18. 10 1920 - 001 - 28.11.2022